✦ Fiberglass pool installation

Fiberglass Pool Installation in West Palm Beach

Sensassion Pools and Spa handles fiberglass pool installation in West Palm Beach from our showroom on Okeechobee Boulevard. We help you pick a shell, pull permits, set the pool, and get it ready to swim.

A fiberglass pool arrives as one solid shell built in a factory. That means fewer weeks with a torn up yard. It also gives you a smooth surface that resists algae in our hot, wet climate.

This page walks you through the full process. You will learn about city permits, Florida fence laws, sandy soil, storm season, and cost. Short answers to common questions sit right where you need them.

Fiberglass pool in a West Palm Beach backyard

Quick facts

License: Florida Certified Pool/Spa Contractor CPC1461254

Shell brands: Latham and X-Pools

Showroom: 2550 Okeechobee Blvd, Unit G2, West Palm Beach, FL 33409

Call: (561) 685-1315

What Does Fiberglass Pool Installation Include?

It covers every step from the first yard visit to the first swim. A complete job includes:

  • TickA site visit to check access, soil, setbacks, and buried lines
  • TickPermit filing with the City of West Palm Beach
  • TickExcavation, a gravel base, and setting the shell by crane
  • TickPlumbing, pump, filter, and electrical hookups
  • TickBackfill, coping, and your new deck
  • TickA safety barrier that meets Florida law
  • TickFinal inspections, water balance, and startup

Some quotes leave out the deck, the fence, or the electrical work. Ask what each price covers. A clear quote lists every item so you can compare them side by side.

Overhead view of a newly installed rectangular fiberglass pool

How Long Does Fiberglass Inground Pool Installation Take in West Palm Beach?

The build itself moves fast. Digging, setting the shell, and plumbing often finish within a week or two. Permits, inspections, deck work, and rain add more time. Plan for several weeks from permit approval to your first swim. Concrete pools take longer because crews form, spray, and cure the shell on site.

Our Fiberglass Pool Install Process, Step by Step

Every yard is different. Still, most projects follow the same eight steps.

1. Yard Visit and Layout

We measure your yard and check how a crane can reach it. We look at power lines, trees, septic tanks, and side yard width. We also check the setback rules for your lot.

2. Permits From the City

West Palm Beach runs its own building permit program for work inside city limits. Applications go through the City’s online EPL system. The Building Division sits at City Hall, 401 Clematis Street. Some homes carry a West Palm Beach mailing address but sit outside city limits. Those permits go through Palm Beach County instead.

3. Call Sunshine 811

Florida law requires a locate request at least two full business days before anyone digs. Utility companies then mark buried gas, power, water, and cable lines. We keep those marks visible until the dig is done.

4. Excavation and Gravel Base

The crew digs a hole slightly larger than the shell. Next, they spread and level a bed of crushed stone. A level base keeps the shell from settling or shifting later.

5. Crane Sets the Shell

The shell rides in on a flatbed truck. A crane lifts it over your house or fence and lowers it into the hole. On tight lots, crane reach often decides which shells will fit.

6. Plumbing and Backfill

The crew connects the drains, returns, and skimmer lines to your pump and filter. They add water to the shell and backfill around it at the same pace. Matching both levels keeps the pressure even on the walls.

7. Coping, Deck, and Barrier

A concrete bond beam locks the top edge in place. Coping goes on next, then your paver or concrete deck. The safety barrier goes up before the final inspection.

8. Final Inspection and Startup

Inspectors check the electrical bonding, equipment, and barrier. Nobody should swim until the pool passes. After approval, we balance the water and show you how to run the equipment.

Do I Need a Permit for a Pool in West Palm Beach?

Yes. Every new inground pool needs a building permit. Inside city limits, the City’s Building Division issues it. Their main line is (561) 805 6700. Electrical and barrier work often need separate permits too. In Palm Beach County, each barrier element needs its own sub permit.

What Are Florida’s Pool Fence Rules?

Florida’s Residential Swimming Pool Safety Act sets the rules for every home pool. Each new pool needs at least one approved safety feature. A barrier must stand at least 4 feet high on the outside. It cannot have gaps a young child could crawl under or squeeze through.

Doors from the house to the pool need a self closing, self latching device. The release must sit at least 54 inches above the floor. Pool alarms and approved safety covers are other options. Many local homes use a screen enclosure or a fence with a self latching gate.

Fiberglass Swimming Pool Installation on West Palm Beach Soil

Most of our ground is sand, and the water table sits close to the surface. That matters for any pool. It matters even more for a fiberglass shell.

A fiberglass shell weighs far less than a concrete pool. When groundwater rises, an empty shell can lift. The International Code Council warns that pools in high groundwater areas risk popping out of the ground. It points to hydrostatic relief valves as the fix.

So we plan for water before we dig. Near the Lake Worth Lagoon and Clear Lake, groundwater can sit only a few feet down. In those spots, crews may pump water out of the hole during the dig. A solid base and a relief valve protect the shell for years.

Can You Install a Fiberglass Pool in a Small Backyard?

Yes. Small shells and plunge pools fit lots that cannot hold a full size pool. That helps in Grandview Heights and Flamingo Park, where 1920s cottages line oak shaded streets. Crane access matters more than yard size. If a crane can reach the spot, a small shell can usually go in.

El Cid, Flamingo Park, Grandview Heights, and Northwood Hills are all city historic districts. Outdoor projects there may need extra review. We check this early so it does not stall your start date.

Fiberglass vs Concrete Pools in South Florida

Both pool types work here. They differ in build time, upkeep, and long term cost.

Concrete makes sense for very large or unusual designs. Fiberglass suits most families who want a pool sooner with less weekly work.

Feature Fiberglass Concrete
Build time Weeks after permits Often months
Surface Smooth gelcoat Rough plaster or pebble
Algae Hard for algae to grip Pores give algae a hold
Resurfacing Rarely needed Needed every several years
Salt water Works well Salt can wear plaster over time
Shapes Set factory molds Any custom shape
Size Limited by highway shipping width Almost no limit

Do Fiberglass Pools Work With Salt Water Systems?

Yes. Salt does not eat into gelcoat the way it can wear down plaster. Many owners pair a fiberglass shell with a salt chlorine generator. Just confirm that ladders, rails, and lights are rated for salt water.

Which Pool Shapes and Features Can I Choose?

Most shells come in a few main styles:

  • TickRectangle shells for laps and a clean, modern look
  • TickFreeform shells with curves that suit tropical plants
  • TickTanning ledge shells with a shallow shelf for lounging and toddlers
  • TickPool and spa combos with a raised spa at one end
  • TickPlunge pools for small yards and quick cool downs

Popular extras include LED lights, a heat pump for January swims, waterline tile, and paver decks. A screen enclosure keeps out leaves, lizards, and bugs.

Rectangular fiberglass pool with an attached spa and lounge chairs

What Affects the Cost of Fiberglass Pools Installation?

Your price depends on the shell and on your yard. These factors move the number most:

  • TickShell size, depth, and model
  • TickCrane size and how far it must reach
  • TickGroundwater pumping or extra fill
  • TickDeck size and material
  • TickBarrier type, such as a fence or a screen enclosure
  • TickEquipment like heaters, salt systems, and automation
  • TickPermit fees and any engineering the City requests
  • TickRemoving an old pool, shed, or slab

The lowest quote does not always mean the lowest final bill. Check what each quote leaves out. Get a written, itemized price before you sign anything.

Should I Drain My Fiberglass Pool Before a Hurricane?

No. Keep the water in. Hurricane season runs from June 1 through November 30. Heavy rain raises the water table fast. The water’s weight holds the floor and walls of a fiberglass pool in place. UF/IFAS Extension also advises against draining or partly draining a pool before a storm.

Before a storm, shut off power to the pool equipment at the breaker. Bring in furniture, toys, and loose decor. After the storm, clear debris before you restart the pump.

Can I Install Fiberglass Inground Pool Kits Myself?

It is possible, but hard. You still need a permit, an 811 locate, a crane, and passed inspections. One leveling or backfill mistake can crack the shell or void the maker’s warranty. Most homeowners save time and risk with a licensed installer.

Is Fiber Glass Pool Installation Something Different?

No. “Fiber glass” with a space is just another spelling. Both terms mean one solid pool shell made from glass fibers and resin.

How Do I Keep a Fiberglass Pool Clean in Florida Heat?

Run the pump every day and brush the walls once a week. Test the water weekly, and more often after summer storms. The smooth gelcoat makes brushing quick. Skip wire brushes and harsh scrub pads on the surface.

Where Do We Install Fiberglass Pools in West Palm Beach?

We work across the city, from the waterfront to the western neighborhoods. Areas we serve include:

  • Location pinEl Cid, between South Flagler Drive and South Dixie Highway
  • Location pinFlamingo Park, framed by Parker Avenue and Belvedere Road
  • Location pinGrandview Heights, near Park Place and Alabama Avenue
  • Location pinOld Northwood, Northwood Hills, and Northboro Park
  • Location pinSoSo, the homes south of Southern Boulevard
  • Location pinNeighborhoods along Okeechobee Boulevard, Palm Beach Lakes Boulevard, and Haverhill Road

We also serve nearby cities across Palm Beach County. See every area we cover on our homepage.

Start Your Fiberglass Pool Installation in West Palm Beach

Want to see shells and finishes in person? Visit Sensassion Pools and Spa at 2550 Okeechobee Blvd, Unit G2, West Palm Beach, FL 33409.

Bring a photo of your yard and a rough budget. We will walk you through shell options, timing, and next steps. Request your quote at sensassionpoolsandspa.com.

Call +1 (561) 685-1315