Case study 03 · Haverhill, FL

A 35-foot Olympia 16 pool, in Haverhill.

Latham’s largest Olympia in sapphire blue, craned over a two-story house near West Palm Beach and finished with an ice white marble deck.

Built and photographed by the Sensassion crew · Installed 2026 · Licensed Pool/Spa Contractor #CPC1461254
Latham Olympia 16 fiberglass pool with a new ice white marble deck in Haverhill, West Palm Beach

Marble deck complete
The same Haverhill backyard as open lawn on day one
Day one
  • Olympia 16Latham swim and lap pool · sapphire blue · 35′ × 16′
  • 15,250 gallons3′6″ to 6′6″ deep, the largest of the three Olympia sizes
  • Ice white marbleMarble paver decking and coping around the full pool
  • Haverhill, FLPalm Beach County · beside West Palm Beach, close to our showroom
The build

From lawn to lap pool, step by step.

Some backyards ask for a small pool. This one, behind a two-story home in Haverhill, had the length for a real one: a long, fenced lawn with room for 35 feet of water. The answer was the Olympia 16, the largest pool in Latham’s Olympia line, in sapphire blue.

A long lawn, opened end to end

A 35-foot pool needs a 35-foot hole, plus working room on every side. The excavator came in across the lawn, the dig ran the length of the yard, and the spoil was hauled away as part of our standard installation. The excavation was then lined and finished with a stone base, so the shell would land on a flat, firm floor.

Excavation for the 35-foot pool behind the two-story house
The dig, running most of the length of the backyard.
Lined excavation with a stone base ready for the pool shell
Lined, with the stone base in, ready for the shell.

Thirty-five feet of pool, over a two-story house

The Olympia 16 arrived from Latham in one piece on a trailer. With the house between the street and the backyard, the route was over the top. The crane set up at the curb, picked the shell off the trailer and carried it above the roofline of a two-story home before lowering it toward the crew in the yard. It is the most dramatic hour of any fiberglass project, and it is planned long before the truck arrives.

Latham Olympia 16 pool shell on a trailer in the street
The shell at the curb, still on its trailer.
35-foot pool shell lifted by crane above a two-story house
Above the roof of a two-story house.
Olympia 16 shell coming down over the backyard
Coming down over the backyard, guided by hand.

Setting the biggest Olympia

The Olympia 16 measures 35′ by 16′, runs from 3′6″ to 6′6″ deep and holds about 15,250 gallons. We list it as a rectangular swim and lap pool, and the shape shows why: one long, straight run with the entry steps molded in at the shallow end. The crew walked it into position on the crane, then checked it for level along its full length before the rigging came off.

Crew guiding the sapphire blue Olympia 16 shell into the excavation
Walking the sapphire blue shell into the excavation.
Olympia 16 shell set in the ground, still on the crane rigging
Set, with the crane rigging still attached.

Braced, plumbed and filled

On a pool this long, the shell is braced across the top while the plumbing goes on and the backfill comes up, and it is filled with water at the same pace so the walls stay supported on both sides. The water in these photos is there to hold the shell steady, not to swim in yet. The equipment followed: a variable-speed pump, a salt water system and Wi-Fi automation for the pump and lights, all part of the standard package, along with the permit coordination and the engineer plan.

Olympia 16 shell braced across the top during plumbing and backfill
Braced across the top while the plumbing and backfill go in.
Pool filled with water during backfill, with forms around the rim
Filled during backfill, with the forms set for the concrete collar.

A concrete collar, then ice white marble

A concrete collar was poured around the rim to tie the top of the shell to the ground, and the marble went down on top of it. Ice white marble pavers run around all four sides, with a matching coping course at the waterline and a wide stretch of deck toward the house. Around a pool this size, the deck is a real part of the budget. We price decking at $18 per square foot, and every pool page on this site has a calculator for it.

Concrete collar poured around the Olympia 16 pool
The concrete collar, poured around the rim.
Installer cutting ice white marble pavers beside the pool
Cutting marble to fit, piece by piece.

Sapphire blue on ice white

With the last pavers set, the project comes together: a long sapphire blue rectangle framed in white. There is no screen enclosure on this one, so the pool sits open to the yard. When these photos were taken the marble was freshly laid and the ground around it was still bare soil from the build.

Wide view of the ice white marble deck around the 35-foot pool
The full deck, the day the marble was finished.

Thinking about a pool in Haverhill, West Palm Beach or anywhere in Palm Beach County? This is home ground for us, close to our showroom on Okeechobee Boulevard. Start with the West Palm Beach service area guide or the installation timeline guide.

The products

The model in this build.

  • Latham Olympia 16 pool in sapphire blueThis pool

    Latham Olympia 16

    Rectangular swim and lap pool, 35′ × 16′, 3′6″–6′6″ deep, about 15,250 gallons. Starting at $72,451 installed with salt water and Wi-Fi automation.

    See the Olympia 16

  • Latham Olympia 14 fiberglass poolSmaller yard?

    Latham Olympia 14

    The same shape at 30′ × 14′, 3′6″–6′ deep. Starting at $68,272 installed. The Olympia 12, at 26′ × 12′, starts at $58,212.

    See the Olympia 14

Like this pairing? Sapphire blue with ice white marble also appears in our Stuart case study. Sapphire blue is one of six Latham shell finishes; preview them on the Latham page. Latham shells carry the Latham limited lifetime structural warranty (terms apply).

Gallery

Every stage, documented.

  • Open backyard lawn in Haverhill before the pool
  • Excavator arriving to start the dig
  • Crane lifting the pool shell from the street
  • Pool shell above the two-story house
  • Sapphire blue shell hanging from the crane rigging
  • Olympia 16 shell set in the ground
  • Shell braced during plumbing and backfill
  • Sapphire blue pool filled before the deck
  • Marble coping course around the pool
  • Marble deck looking toward the house
  • Wide view of the marble deck
  • Olympia 16 pool with the finished marble deck
Questions

This project, answered.

What people ask when they see this backyard. Every project is quoted for its own property.

How much does a pool like this cost?

Today the Latham Olympia 16 starts at $72,451 installed with our standard package — salt water system, variable-speed pump, Wi-Fi automation, dirt removal, electrical subpanel and permit coordination. Decking adds $18 per square foot. Your final quote is personal to your lot.

How do you get a 35-foot pool into a backyard?

In one piece. The shell arrives on a trailer, and when the house stands between the street and the yard, a crane lifts it over the roof. On this project that meant clearing a two-story home. The lift is planned in advance and the shell is typically in the ground the same day.

Is the Olympia 16 a lap pool?

We list the Olympia 16 as a rectangular swim and lap pool. It is 35′ long and 16′ wide, from 3′6″ to 6′6″ deep, and holds about 15,250 gallons.

Do you build in Haverhill and West Palm Beach?

Yes. Haverhill sits beside West Palm Beach, close to our showroom on Okeechobee Boulevard, and both are well inside our service area. Our installation includes the permit coordination and the engineer plan. See the West Palm Beach service area page.

Does the Olympia come in smaller sizes?

Yes. The Olympia comes in three sizes: the 12 (26′ × 12′, from $58,212), the 14 (30′ × 14′, from $68,272) and the 16 in this project (35′ × 16′, from $72,451), each in six Latham shell colors.

Your backyard next

Want a backyard like this one?

Tell us about your lot and we will walk you through models, colors and a real installed price — the same way this project started.

Showroom
2550 Okeechobee Blvd, Unit G2
West Palm Beach, FL 33409
Hours
Mon 10 AM – 6 PM · Tue–Fri 9 AM – 6 PM
Sat 10 AM – 5 PM · Sun by appointment
Call us
(561) 685-1315